truck

**Red91** · 10-09-2012, 10:54 AM

Originally Posted by Devs93

5/7 DJM
295/50 series out back

I swear I am as low as you what are your fender measurments?

**Devs93** · 10-09-2012, 10:57 AM

Idr id have measure

**Devs93** · 10-09-2012, 10:59 AM

Im starting to wonder if ex cabs dont dit a lil lower in the back. Mine was a lil lower that dewaynes in the back and he has the same setup

**dagen_1** · 10-09-2012, 11:11 AM

i agree..i think the extra length of the ext cab trucks "plays" with the final ride height. i've got the standard 6" flip kit, drop shackles on bottom hole for 1 inch making a total of 7. i swear deven is at 8" drop EASY. the RED91 looks to be 7+ too

**dagen_1** · 10-09-2012, 11:13 AM

after heritage i was ready to move the shackle bolts to the top hole...lol still might. i just dread pulling the coils again to make the front match.

**Red91** · 10-09-2012, 11:13 AM

Honestly I think it is all an illusion. I think the hieght difference in the wheel wells is more exagerated with the ext. cab, Honestly it drives me nuts my body line is dead level but if I look at my wheel wells it looks a little Cali.... I don't like Cali.

**dagen_1** · 10-09-2012, 11:15 AM

Originally Posted by Red91

Honestly I think it is all an illusion. I think the hieght difference in the wheel wells is more exagerated with the ext. cab, Honestly it drives me nuts my body line is dead level but if I look at my wheel wells it looks a little Cali.... I don't like Cali.

the rear wheel wells aren't "open" as high as the fronts. when i first lowered mine, the rake drove me nuts.. guys would say its level from the top of the wheel to the fender lips, and it was..but the truck has rake. that's why i think you and deven are lower in the rear than i am

**Devs93** · 10-09-2012, 11:19 AM

Originally Posted by dagen_1

the rear wheel wells aren't "open" as high as the fronts. when i first lowered mine, the rake drove me nuts.. guys would say its level from the top of the wheel to the fender lips, and it was..but the truck has rake. that's why i think you and deven are lower in the rear than i am

Took the words out of my mouth!
The fronts are cut higher to accomidate for the wheels turning i guess. It drive me friggin crazy having absolutley no wheel gap out back and still having it up front

**Red91** · 10-09-2012, 11:22 AM

Maybe Dev is on to something then... I kinda like a little rake but that's just me. I am tempted to put some 3" drop springs in front and run a 20/22 combo in

not sure on tire size but in my head it's badass

**Red91** · 10-09-2012, 11:22 AM

Originally Posted by Devs93

Took the words out of my mouth!
The fronts are cut higher to accomidate for the wheels turning i guess. It drive me friggin crazy having absolutley no wheel gap out back and still having it up front

^^^^^^^^^
x1,000